Comtech EF Data PCB-4000A, Инструкция по установке и эксплуатации

Страница: 62 / 88

PCB-4000A 1+1 Phase Combiner
Revision 2
Serial Remote Control 5–14 MN-PCB-4000A
Parameter
Type
Command
(Instruction
Code and
qualifier)
Command
Valid for
PCB or
SSPA
Arguments for
Command or
Response to
Query
Description of Arguments
(Note that all arguments are ASCII numeric codes – i.e.,
ASCII codes between 48 and 57)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
qualifier)
Query Valid
for PCB or
SSPA
Response to
Query
(Target to
Controller)
SNMP Write
Community
String
WCM= PCB Up to 20
characters, no
spaces
Command or Query.
Sets or returns the SNMP Write Community string.
Example: WCM=private
Notes: Empty string is not allowed
WCM=
WCM?
WCM#
WCM? PCB WCM=x…x
(see
Description of
Arguments)
IP Address IPA= PCB 18 bytes
numerical
Command or Query.
Used to set the IP Address and network prefix for the 10/100
Base T Ethernet management port, in the form
aaa.bbb.ccc.ddd.yy, where permitted ranges are:
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 001-255
yy=08-30
Example: IPA=010.006.030.001.24
Default: 192.168.1.4.24
IPA=
IPA?
IPA*
IPA? PCB IPA=
aaa.bbb.ccc.dd
d.yy (see
Description of
Arguments)
IP Gateway IPG= PCB 15 bytes
numerical
Command or Query.
Used to set the IP Gateway Address for the Ethernet
management port, in the form aaa.bbb.ccc.ddd, where
permitted ranges are:
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 001-255
Example: IPG=010.006.030.001
Default: 192.168.1.5
IPG=
IPG?
IPG*
IPG#
IPG? PCB IPG=
aaa.bbb.ccc.dd
d
(see
Description of
Arguments)
MAC Address N/A N/A
12 bytes, alpha-
numerical
Query only.
Used to query the unique MAC Address for the modem.
Example: MAC=0006B00001C2
N/A MAC? PCB
MAC=aabbccd
deeff
(see
Description of
Arguments)
Ping Reply
Enable
PNG= PCB 1 byte, value of
0 or 1
Command or Query.
Used to Enable or Disable Ping reply in the form x, where:
0=Disable Ping Reply
1=Enable Ping Reply
PNG=
PNG?
PNG*
PNG? PCB PNG=x
(see
Description of
Arguments)