Comtech EF Data CDM-625A, Инструкция по установке и эксплуатации

Страница: 493 / 756

CDM-625A Advanced Satellite Modem MN-CDM625A
CDM-625A ODU (Transceiver, BUC, LNB) Operation Revision 4
10–23
10.3.3.3.3.3.1.3 ODU: FSK-control

KST

Configuration

Miscellaneous
HPA:Off Fault-Logic=Summary
LNA:OFF Fault-Logic=Summary Cal:No
Use the ◄ ► arrow keys to select HPA , (HPA) Fault-Logic-Summary , LNA , (LNA) Fault-Logic-
Summary , or Cal, and then use the
▲▼
arrow keys to change that setting:
Selection Setting
HPA (HPA power enable) Select Off or On .
Fault-Logic
This controls whether or not a HPA fault is indicated on the Fault status, and activates the
Summary Fault Relay. Select Summary or No-Summary .
LNA (LNA power enable) Select Off or On .
Fault-Logic
This controls whether or not a LNA fault is indicated on the Fault status, and l activates
the Summary Fault Relay. Select Summary or No-Summary.
Cal
To calibrate, select YES and press ENTER . Calibration allows the system to determine
nominal LNB or LNB power consumption, performed at initial installation only. (Default is
NO .)
Press ENTER when done.
10.3.3.3.3.3.1.4 ODU: FSK-control

KST

Information
KST Info: Model Tx+Rx-Param
Misc Numbers (

)
These read-only screens provide the ODU’s current configuration information without risking
inadvertent changes.
Use the
◄ ►
arrow keys to select Model , Tx+Rx-Param , Misc , or Numbers , and then press
ENTER
.
Once any KST Info screen has been viewed, press ENTER or CLEAR to return to the previous
menu.
10.3.3.3.3.3.1.5 ODU: FSK-control

KST

Information

Model
MODEL: KST-2000B
HPA: CEFD-SSPA
This screen displays the KST and HPA model numbers.