Comtech EF Data CDM-625A, Инструкция по установке и эксплуатации

Страница: 407 / 756

CDM-625A Advanced Satellite Modem MN-CDM625A
Telnet Command Line Interface (CLI) Operation Revision 4
9–27
Hot
Key Dialog Window
Option Entry
F Rx Frequency
Enter an Rx Frequency as follows:
•
Range 1 – From 50.0000 to 180.0000 MHz
•
Range 2 – From 950.0000 to 2250.0000 MHz
G Rx Spectrum Invert Use the ↑↓ arrow keys to select Norma l or Inverted
H Rx Descrambler Use the ↑↓ arrow keys to select Off , Normal , or IESS315
I Rx Acq Sweep Range Enter a value from 1 to 200 kHz
J
Rx Reed-Solomon
Decoding
Use the ↑↓ arrow keys to select Normal , IESS410 , EF Data , or IBS
K Rx Data Invert
Typical for either entry – Use the ↑↓ arrow keys to select Normal or Inverted
L Rx Data Clock Invert
M Rx Ternary Code Use the ↑↓ arrow keys to select AMI , B8zs , B6zs , or Hdb3
N Rx EbNo Alarm Point Enter a value from 0.1 to 16.0 dB
O Rx Equalizer Enable Use the ↑↓ arrow keys to select Disabled or Enabled
P Rx Submux Use the ↑↓ arrow keys to select Off or On
Q Rx Submux Ratio
Use the ↑↓ arrow keys to select the IP/Synchronous setting:
• 1/9 • 1/8 • 1/7 • 1/6 • 1/5 • 1/4
•
2/7
•
1/3
•
2/5
•
3/7
•
1/2
•
3/5
•
2/3
•
3/4
•
4/5
•
1/1
•
5/4
•
4/3
•
3/2
•
5/3
•
2/1
•
7/3
•
5/2
•
3/1
• 7/2 • 4/1 • 5/1 • 6/1 • 7/1 • 8/1
• 9/1 • 1/59 • 1/39 • 1/19
R Rx Filter Rolloff Factor Use the ↑↓ arrow keys to select an Rx Rolloff Factor of 0.12 or 0.35
Press a hot key to open a dialog window. Otherwise, press [ESC] to return to the Modem
submenu.