Comtech EF Data CDM-625A, Инструкция по установке и эксплуатации

Страница: 405 / 756

CDM-625A Advanced Satellite Modem MN-CDM625A
Telnet Command Line Interface (CLI) Operation Revision 4
9–25
Hot
Key Dialog Window
Option Entry
I Tx Power Level
Enter a value as follows:
•
Range 1 – From -99.9 to 99.9 dBm
•
Range 2 – From -40.00 to 0.0 dBm
J
Tx Reed-Solomon
Encoding
Use the ↑↓ arrow keys to select Normal , IESS410 , EF Data , or IBS
K Tx Data Invert
Typical for either entry – Use the ↑↓ arrow keys to select Normal or Inverted
L Tx Data Clock Invert
M Tx Ternary Code Use the ↑↓ arrow keys to select AMI , B8zs , B6zs , or Hdb3
N Tx Carrier State
Use the ↑↓ arrow keys to select:
•
Off
•
On
•
RTI, 10 s timeout
•
Off External
•
Off BUC delay
•
RTI, 1 s timeout
•
RTI, 2 s timeout
•
RTI, 4 s timeout
•
RTI, 7 s timeout
O POCO Use the ↑↓ arrow keys to select Disabled or Enabled
P Tx Submux Use the ↑↓ arrow keys to select Off or On
Q Tx Submux Ratio
Use the ↑↓ arrow keys to select an IP/Synchronous setting:
• 1/9 • 1/8 • 1/7 • 1/6 • 1/5 • 1/4
•
2/7
•
1/3
•
2/5
•
3/7
•
1/2
•
3/5
•
2/3
•
3/4
•
4/5
•
1/1
•
5/4
•
4/3
•
3/2
•
5/3
•
2/1
•
7/3
•
5/2
•
3/1
• 7/2 • 4/1 • 5/1 • 6/1 • 7/1 • 8/1
• 9/1 • 1/59 • 1/39 • 1/19
R Tx Filter Rolloff Factor
Use the ↑↓ arrow keys to select a Tx Rolloff Factor:
•
0.05
•
0.10
•
0.15
• 0.20 • 0.25 • 0.30
Valid code rates depend on the selected FEC and Mod types – for example, you
cannot select “VersaFEC 16QAM 0.644” if your FEC is “TCM”
Press a hot key to open a dialog window. Otherwise, press [ESC] to return to the Modem
submenu.