Comtech EF Data CDM-625A, Инструкция по установке и эксплуатации

Страница: 193 / 756

CDM-625A Advanced Satellite Modem MN-CDM625A
Front Panel Operation Revision 4
6–69
Define Port Priority by using the ◄ ► arrow keys to select the port ( P1 , P2 , P3 , or P4 ), and then
using the
▲▼
arrow keys to designate a priority from 1 to 4 (with Priority 4 being the highest).
CONFIG: IP

IP Setup: QoS

L3 QoS
When the optional IP Packet Processor card is either not installed or installed but disabled , and
L3 QoS is selected, this menu is
disabled
and appears as follows:
L3 QoS=Off
(Fixed at Off) (

)
Otherwise, when the optional IP Packet Processor card is installed and enabled , the L3 QoS
menu appears as follows:
L3 QoS=Off
(Off,Max/Prio,MinMax,DiffServ) (

)
Use the
▲▼
arrow keys to set the L3 QoS operational priority. Press ENTER .
Valid settings are:
Setting Function
Off QoS disabled.
Max/Prio
(Maximum priority only) Provides multi-level traffic prioritization with the ability to limit
maximum traffic per priority class.
MinMax
(Minimum/Maximum priority) Provides a Committed Information Rate (CIR) to each
user-defined class of traffic with the ability to allow a higher burstable rate depending
on availability.
DiffServ
(DiffServ priority only) Industry-standard method of providing QoS, enabling
seamless co-existence in networks that implement DiffServ.
6.2.1.13.3.9 CONFIG: IP

IP Setup: Stats
IPstats: Port x In Out (

)
Unicasts: 00000003 00000023 Clr:N
This screen displays IP traffic statistics for both the
In (Ingress)
and
Out (Egress)
directions. Use
the ◄ ► arrow keys to navigate to the proper line, in this order:
First, on the top line – Use the
▲▼
arrow keys to select the bottom-line
IP Stats Type
as WAN ,
Ports 1 through 4 , HDLC FPGA , or Management. (“ In ” and “ Out ” are column labels for the
bottom line parameters and are not selectable.)
Next, on the bottom line
– Use the ▲▼ arrow keys to view the desired statistical parameter.