manualshive.com logo in svg

ComSifter CS-8D Pro, Руководство пользователя, Страница: 118 / 245

Поделиться
Скачать
ComSifter CS-8D Pro Скачать руководство пользователя страница 118

C O N F I G U R I N G   C O M S I F T E R  

User Guide  |  

ComSifter CS-8D Pro

  

3–86 

ComSifter Status 

ComSifter monitors all of its critical services every five minutes and upon entering this screen. There are three 
conditions. 

  The service or function is not enabled. 

  The service or function is on, or functioning properly. 

  The service or function is off, or not functioning properly. 

 

 

Figure 3-91

: System and Service Status

 

Active Directory Last Resync 

Displays the status of the last Active Directory Resync. Active Directory resync is performed every hour, 8 
minutes after the hour. If the resync was successful, this indicator will be green; if not, the indicator will be red. 

CPU Load Average 

Under normal circumstances, ComSifter runs at a 1-5% CPU load with occasional peaks up to 50%. If 
ComSifter sustains a 50% load for more than one minute, this indicator will turn red and a message will be sent 
to ComSifter Technical Support. 

Content Filter Service 

Content Filter is the service that is running the filtering process. This indicator should always be green. If the 
service were to stop the condition would turn red and a message will be sent to ComSifter Technical Support. 

DHCP Available Leases 

If the percentage of available leases in the lease address pool is greater than 10%, the indicator will be green. 
If the number of available leases is less than 10%, the indicator will turn red. 

DHCP Server 

If ComSifter is not using its built-in DHCP server, a   indicator is a normal condition. If ComSifter is using its 
built-in DHCP server, then a   indicator is an abnormal condition and indicates that the DHCP server has 
stopped. Before contacting Comsift Technical Support, try restarting the DHCP server. 

Содержание CS-8D Pro






















































































































































































































































Отзывы:

Нет отзывов