manualshive.com logo in svg

Comrex BRIC-Link, Руководство по эксплуатации продукта

Поделиться
Скачать
Comrex BRIC-Link Скачать руководство пользователя страница 37

37

•  Incoming Connection Profile

 - This allows users to select whether SIP calls will take place using a specific 

encoding algorithm. Note: If this option is chosen, only calls using the selected algorithm are allowed.

 

Default is “None”.

•  Use SIP Proxy

 - This option determines whether the SIP function is “registered” to a SIP cloud server. If this 

setting is enabled, then the address, user name, and password for the proxy must be added in the relevant 
fields.

•  SIP Proxy Address

 - IP address or URL of the SIP proxy used.

•  SIP Username

 - Username for logging into registered SIP server; provided by the SIP service provider.

•  SIP Password

 - Password for logging into registered SIP server; provided by the SIP service provider.

aDVanceD system settings

When the 

Show Advanced Settings

 option is enabled, additional options and categories are displayed.

SECURITY

Remote Control

 - This enables remote control and firmware update functionality. This option may be changed in the 

System console only, and is View Only in the Web Interface.

Remote Diagnostics

 - When activated, this option allows for remote diagnostics capability. The default setting is Off.

Web Server Port - 

This controls the port that the

 

UI web server uses when remote control is enabled. The default 

setting is TCP 80.

AUXILIARY SERIAL

Baud Rate

 - Allows for controlling the Baud Rate of the serial port. Default is set to 9600.

Data Bits - 

Allows for the configuration of number of data bits. Default is set to 8.

Stop Bits - 

Configures the number of stop bits. Default is set to 1.

Flow Control - 

Allows for selection of the flow control method. Default is set to None with options for HW (RTS/CTS) 

and SW (XON/XOFF). This has no functional effect on BRIC-Link.

Parity - 

Users can select parity protection with this setting. Default is set to None with the additional options for Odd 

or Even.

Содержание BRIC-Link
































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды