Pearl
– installation instructions
Electronic push button cabinet lock
Pearl
—
Installation
instructions:
KEYPAD version
8
KEYPAD version
Warning: Manual Lock - Single Use
Timeout ON
is a feature to prevent
users from occupying a shared use
locker or cabinet for a prolonged
period of time. Turning this feature
on will disable the user code after a
programmable amount of time. After
this time elapses, Pearl can only be
opened with the supervisor code.
To change the Pearl to Single Use
Timeout ON or OFF, follow the steps on
page 5 to enter programming mode.
There is a
10
second programming time
limit between each step. If Pearl times
out or an error is made, programming
will end and you will need to enter
programming mode again.
1. Place Pearl into programming
mode (see page 5).
a. To set Timeout ON, type
2XX
and then press
(enter).
(
XX
represents a time
period from 04 to 48 in
whole hours.)
OR
b. To turn Timeout OFF, type
20
and then press
(enter).
3. If successful, the
green
indicator
light will illuminate for 1 second.
Continue programming or press
9
and
then
(enter) to exit programming.
Warning: Security Timeout ON
will
disable the Pearl from use for 5 minutes
when 5 invalid attempts to unlock Pearl
occur. During this time, Pearl will not
unlock with either the valid user or
supervisor code.
To change the Pearl to Security Timeout
ON or OFF, follow the steps on page 5
to enter programming mode.
There is a
10
second programming time
limit between each step. If Pearl times
out or error is made, programming
will end and you will need to enter
programming mode again.
1. Place Pearl into programming
mode see page 5).
a. To turn
Security Timeout
ON
, type
11
and then
press
(enter).
OR
b. To turn
Security Timeout
OFF
, type
10
and then
press
(enter).
2. If successful, the
green
indicator
light will illuminate for 1 second.
Continue programming or press
9
and
then
(enter) to exit programming.
Programming Single Use Timeout ON / Single Use Timeout OFF
Programming Security Timeout ON / Security Timeout OFF
