Pearl
– installation instructions
Electronic push button cabinet lock
Pearl
—
Installation
instructions:
KEYPAD version
2
KEYPAD version
Contents – Manual Lock Version:
2 AAAA alkaline batteries
1 Offset locking cam / 1 Straight
locking cam
FlexaCam adapters
Collar – Intended for surface
mount applications
Mounting hardware
Each lock is shipped with two green
stickers that are needed for resetting
Pearl. Place one of these green stickers
on the back of the device, in case Pearl
ever needs to be reset. The remaining
green sticker should be saved in a safe
and secure location for future reference.
(See page 9 for reset instructions.)
To clean the Pearl surface, apply non-
acid based cleaner to a clean cotton
cloth; do not spray cleaner directly on
the Pearl. Wipe down keypad and its
respective housing surfaces of excess
cleaner.
Packaged Components
Care and Cleaning
FlexaCam adaptors (if so equipped) can
be attached to the cam to provide up
to 12 different dimensional variations.
See image to the left.
FlexaCam Adaptors
FlexaCam
adaptor
The Pearl
serial number
can be found
by sliding the
housing base.
