The portability of the thermostat offers the following advantages:
no need to lay a cable, which is especially advantageous when
–
old buildings are being modernized
optimal location of the device can be selected during operation
–
it is also advantageous when you intend to locate the thermostat
–
in different rooms in the course of the day (e.g. in the living
room during the day but in the bedroom at night)
The effective range of the transmitter incorporated in the
thermostat is approximately 50 m in open terrain. This distance
may become considerably shorter within a building, especially
when a metal structure or a reinforced concrete wall stands in the
way of radio waves.
The switching sensitivity of the thermostat is ± 0.2°C (± 0.3°C).
This means the difference between the adjusted temperature and
the actual temperature measured during the switching process. For
example, if the factory default setting is 20°C on the thermostat,
then the device switches the boiler on at 19.8°C or below, and
switches it off at 20.2°C or above.
This wireless (radio-frequency) thermostat can also be extended
with the
COMPUTHERM
Q1 RX
socket if needed, with which the
thermostat is able to control boilers or any other electrical devices
operating on 230 V (50Hz; max. 10A) (e.g. fan heaters, pumps,
zone valves, etc.) according to the room temperature. (For more
information please consult our website).
- 3 -
Heating mode
Defrosting mode
Temperature
display
Temperature
measurement unit
Room temperature
Set temperature
The information shown on the liquid crystal display of the
thermostat includes the following:
