Computer Automation Technology CAT-800, Руководство пользователя

Страница: 81 / 105

9-13
CAT-800 Long Timers
You can change any of the CAT-800 Long Timer settings by changing the time in the appropriate boxes
and clicking [SAVE SETTINGS] at the bottom of the page. When the CAT-800 is initialized, these timers
are automatically loaded with default values.
Port #1 Timeout Timer
This timer limits the time a signal can appear on the Port #1 receiver input. If this time limit is
exceeded the controller will turn off the transmitter. This timer is programmable between 60 and 1799
seconds. When the CAT-800 is initialized this timer defaults to 180 seconds.
Port #2 Timeout Timer
This timer limits the time a signal can appear on the Port #2 receiver input. If this time limit is
exceeded the controller will turn off the transmitter. When the CAT-800 is initialized this timer defaults
to 180 seconds.
Port #3 Timeout Time
This timer limits the time a signal can appear on the Port #3 receiver input. If this time limit is
exceeded the controller will turn off the transmitter. When the CAT-800 is initialized this timer defaults
to 180 seconds.
System ID Timer
This timer sets the time between ID transmissions. The ID occurs when a repeater user stops
transmitting. This timer is programmable between 60 and 1799 seconds. The timer default is 480
seconds.