Computer Automation Technology CAT-250 страница 34 Скачать руководство пользователя | Manualshive

Страница: 34 / 55

background image

5-11

Control Operator Prefix Number Port #2 (Link) [*502*]

This programming command selects the control operator prefix number for the link port. This number

must precede the command to change the zone control channels through port #2 the link input.

Example: To program a Control Operator Prefix of [200], key-up and send and send [*502*200].

DTMF Access Code [*503*]

This programming command selects the DTMF access prefix number. When the repeater is in the

DTMF Access Mode it will not respond to a COR input. The repeater user must enter the DTMF access

number to activate the repeater. When the repeater returns to rest for a period determined by the

sleep timer, this number must be re-entered to activate the repeater. The default number is [325].

DTMF Pad Test Number [*504*]

This programming command selects the DTMF pad test prefix number. This number must be entered

to initiate a DTMF keypad test. Example: To program a DTMF Pad Test Number of 375, key-up and

send [*504*375]. Un-key and the voice will say: "CONTROL OK."

Port #2 Link Disconnect Control Number [*505*]

This number is used to disconnect the link. Example: To program a link disconnect control number of

5000, key-up and send [*505*5000]. Un-key and the voice will say: "CONTROL OK."

Port #2 Link Connect Control Number [*506*]

This number is used to connect the link. Example: To program a link connect control number of 5001,

key-up and send [*506*5001]. Un-key and the voice will say: "CONTROL OK."

Port #2 Link Receive Only Control Number [*507*]

This number is used to activate the link receive only mode. Example: To program a link receive only

control number of 5002, key-up and send [*507*5002]. Un-key and the voice will say: "CONTROL OK."

Voice Demonstration Control Number [*508*]

This number must be entered to PLAY one of the voice messages. This number must precede the voice

message number. Example: To program a Voice Demonstration Control Number of 700, key-up and

send [*508*700]. Un-key and the voice will say: "CONTROL OK."

Time of Day Number [*509*]

This programming command selects the time request number. This number must be entered to

request a time of day announcement. The default number is [400].

Unlock Number [*510*]

This programming command selects the unlock number used to place the CAT-250 in the programming

mode. This number is not restricted to a seven-digit number. The default number is [7654321].

Read Control And Prefix Numbers [*501 - *510]

Use this programming command to read the control operator and prefix numbers. Example: Key-up

and enter [*501], un-key and the voice will say: "CODE FIVE ZERO ONE IS ONE ZERO ZERO."

«
...
32
33
34
35
36
...
»

Содержание CAT-250
























































Отзывы:

Нет отзывов

Похожие инструкции для CAT-250

Бренд: Magnescale Страницы: 132

Бренд: D+H Страницы: 36

Бренд: D-Box Страницы: 4

Бренд: D+H Страницы: 36

ACTIVE DRIVER M/M 1.1

Бренд: DAB Страницы: 10

Бренд: d&b audiotechnik Страницы: 3

ACTIVE DRIVER M/M 1.1

Бренд: DAB PUMPS Страницы: 38

Бренд: Samson Страницы: 52

Бренд: Quectel Страницы: 95

Бренд: ICAS Страницы: 51

Бренд: Icar Страницы: 40

Бренд: Icar Страницы: 86

Бренд: Icar Страницы: 39

Бренд: IBP Страницы: 12

Бренд: Jabra Страницы: 3

Бренд: Parkside Страницы: 65

Бренд: Dahua Страницы: 137

Бренд: Data Signs Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды