Computer Automation Technology CAT-250 страница 16 Скачать руководство пользователя

Страница: 16 / 55

3-5

8. Port #1 Timeout Enable

Port #1 time-out is user programmable with the [*601*] timer programming commands. When the

CAT-250 is initialized, this timer defaults to 3 minutes. When this channel is turned off, the repeater,

port #1 will not timeout.

1. Port #2 Transmitter Enable

This channel must be enabled for link operation. This channel will automatically be enabled after a

dipswitch #7 initialization reset.

2. Port #2 COR and CTCSS Enable

When this channel is enabled, in addition to a COR input at J2-5, an input from a CTCSS decoder at J2-

3 must also be present before the repeater will activate. A COR input by itself will have no affect.

3. Port #2 COR or CTCSS Enable

When this channel is enabled, the COR and CTCSS inputs will function as a (OR) logic input. This

means activity on either the COR or CTCSS inputs will cause the controller to key the repeater's

transmitter.

4. Port #2 Turn on Delay Enable

When this channel is enabled, a deliberate and sustained input on Port #2 must be present before the

controller will activate the repeater. A time delay of 0.1 to 9.9 seconds can be selected with the

[*624*] programming command. When the CAT-250 is initialized, this timer defaults to 1.0 seconds.

This channel is useful during periods when noise bursts are present on the transceiver input.

5. Port #2 DTMF Pad Test Enable

When this channel is enabled, a repeater user is able to perform a test of their radio's 12 or 16-button

keypad through Port #2. As the numbers are being decoded, they are stored in memory. When the

repeater user stops transmitting the controller will read back all the numbers that were decoded. The

Forced DTMF Entry key is defaulted to the [D] key. It must be entered last and it will not read back

during the pad test.

6. Port #2 Auto Disconnect Enable

When this channel is enabled, the link will disconnect automatically after a period of repeater inactivity.

The voice will say: “LINK TIME OUT”. A repeater or transceiver COR will keep the link activate until

the repeater returns to rest. A rest period of up to 29 minutes can be selected with the [*607*]

programming command. When the CAT-250 is initialized, this timer defaults to 10 minutes.

Zone 2 - Link Control Channels

Содержание CAT-250
























































Результаты поиска

Содержание CAT-250

Отзывы:

Похожие инструкции для CAT-250

Бренды по названию

Популярные бренды

Computer Automation Technology CAT-250, Руководство пользователя

Результаты поиска

Содержание CAT-250

Отзывы:

Похожие инструкции для CAT-250

Бренды по названию

Популярные бренды