Computer Automation Technology CAT-250, Руководство пользователя

Страница: 29 / 55

5-6
Read Event Macro Locations (01-50)
Key-up and send [*16XX]. Un-key and voice will read back the macro control number followed by the
macro data commands stored at that memory location. If the location is empty, the voice will say: "NO
MACRO."
Program Event Macro Locations (01-50)
Key-up and send [*17XX] followed by the macro control number and the string of internal commands
to be executed. Un-key and the voice will say: "CONTROL OK." Example: Program the Port #2
courtesy tone to be the letter “L”.
Erase Event Macro Locations (01-50)
Key-up and send [*18XX]. Un-key, the voice will say: "CONTROL OK."
Event Macro Default Data
01 PORT #1 COR/CTCSS ACTIVE
02 PORT #1 COR/CTCSS INACTIVE
03 PORT #2 COR/CTCSS ACTIVE
04 PORT #2 COR/CTCSS INACTIVE
05 LOGIC INPUT #1 ACTIVE HIGH 1511
06 LOGIC INPUT #1 ACTIVE LOW 1510
07 LOGIC INPUT #2 ACTIVE HIGH 1521
08 LOGIC INPUT #2 ACTIVE LOW 1520
09 LOGIC INPUT #3 ACTIVE HIGH 1531
10 LOGIC INPUT #3 ACTIVE LOW 1530
11 LOGIC INPUT #4 ACTIVE HIGH 1541
12 LOGIC INPUT #4 ACTIVE LOW 1540
13 COURTESY TONE PORT #1 INPUT 5301 3800 5300
14 COURTESY TONE PORT #2 INPUT 5301 3421 5300
15
16 SQUELCH TAIL MESSAGE 5201 3003 5200
17 TRANSMITTER DROP MESSAGE 5201 3004 5200
18 ID MESSAGE INITIAL 6120 5201 3201 5220
19 ID MESSAGE PENDING 6120 5201 3202 5220
20 ID MESSAGE FORCED 5301 3300
21 ID MESSAGE FINIAL 6141 3001 6140
22 TIMED MESSAGE #1 6141 3005 6140
Programming Command Play CW Buffer “L”
*17 14 1 * 5301 3421 5300
Audio Switch OFF
Macro Table Position Audio Switch ON
Macro Control Number (0=OFF 1=ON)