Revision: 01 02/29/2016
Page 5
IMPORTANT
–
READ
BEFORE
INSTALLING
Check the power supply. Voltage, frequency and phase must correspond to that specified on
the unit nameplate. The power supply must be able to handle the additional load imposed by
this equipment.
LOCATING THE UNIT
Consult local building codes and National Code for special installation requirements. When
installing the unit, allow sufficient space for air flow clearance, wiring and servicing the unit.
Front and rear of the unit should have a minimum clearance of 36 inches for servicing
.
.
The unit you have received is very special. It is specifically designed for Computer Room
applications. Please read the following INSTRUCTIONS prior to working on the equipment.
ELECTRICAL DATA:
208v, 3 phase, 60 Hz, 460v, 3 phase, 60 Hz, 208v, 1 phase, 60 Hz, 575v, 3 phase, 60 Hz, 3 phase,
60 Hz, or 415/380v, 3 phase, 50 Hz.
Please check the voltage.
NAMEPLATE DATA
Refer to the unit name plate. It indicates all the electrical data for the unit. LOCAL ELECTRICAL
CODES OR ANY OTHER APPLICABLE CODES MUST BE COMPLIED WITH PRIOR TO WORKING IN
THE UNIT.
