Revision: 01 02/29/2016
Page 20
AMP DRAW: L1
L2
L3
CONTROL INPUT SIGNAL MIN/MAX:
VDC
evap fan #5
MOTOR HP/KW:
F.L.A:
VOLTAGE:
MODEL # ___________________________________________________________________
AMP DRAW: L1
L2
L3
CONTROL INPUT SIGNAL MIN/MAX:
VDC
evap fan #6
MOTOR HP/KW:
F.L.A:
VOLTAGE:
MODEL # ___________________________________________________________________
AMP DRAW: L1
L2
L3
CONTROL INPUT SIGNAL MIN/MAX:
VDC
REHEAT
TYPE: ELECTRIC:
NO. OF STAGES: __________
HEATER AMP DRAW:
STAGE 1: L1:
L2:
L3:
STAGE 2: L1:
L2:
L3:
Humidifier
AMP DRAW: L1: ___ L2:
L3:
VERIFY FILL VALVE OPERATION: ____________________
DRAIN VALVE OPERATION: ___________________________
CONDITION in 100% cooling TEST mode
SUPPLY AIR TEMPERATURE:
°F RETURN AIR TEMPERATURE:
RETURN
RETURN AIR HUMIDITY: ____%
C.W. SUPPLY TEMPERATURE: _____________ ° F C.W. RETURN TEMPERATURE: _____________
° F
CHILLED WATER
WATER IN TEMP:
°F
WATER OUT TEMP:
°F
CHILLED
WATER
VALVE
PRT
NUMBER:
______________________________________________________________________
CHILLED WATER VALVE OPERATION:
MIN/MAX:
VDC RANGE
Automatic Controls
CONTROLLER MODEL:
SOFTWARE REVISION:
REVISION DATE:
CHECK ALL ALARMS
CALIBRATE SENSORS AS NEEDED
VERIFY POINTS LIST WITH CONTROLS CONTRACTOR
VERIFY OPERATION OF LONWORKS COMMUNICATION CARD WITH BMS
CHECK ALL ANALOG OUT PUTS
