Revision: 01 02/29/2016
Page 3
SAFETY
INSTRUCTIONS
Only qualified personnel should install and service this equipment. The installation, start-up,
and servicing of heating, ventilating, and air conditioning equipment can be hazardous and
requires specific knowledge and training. Improperly installed, adjusted or altered equipment
by unqualified personnel could result in serious damage and/or death. When working on the
equipment, observe all precautions in this literature and on the tags, stickers, and labels that
are attached to the equipment as well as all local codes and safety requirements.
This user’s manual contains important safety instructions that should be followed to properly
install and maintain Compu-Aire system Compu Kool Chilled Water Ayan IV In Row Nano series.
Read this manual thoroughly before attempting to install or operate this unit. Store this
manual at safe place for future reference.
Adhere to all warnings, cautions and safety instructions on the unit and in this manual. Follow
all local codes and safety requirements to install and service this unit.
WARNING
Installation and service of this equipment should be done by qualified personnel who
have been specially trained and qualified in the installation of specific HVAC equipment.
Improper installation could result in unaccountable loss or damage. Compu Kool Chilled Water
In Row Nano series equipment requires a permanent power connection from an isolated circuit
breaker. Customer must provide earth ground to the unit per NEC, CEC and local codes as
applicable.
•
Risk of high speed moving parts can cause injury or death.
•
Risk of heavy unit falling over
•
Risk of hot surfaces, sharp edges, splinters and exposed fasteners can cause injury
WARNING
High voltage danger!
Arc flash and electric shock hazard.
Disconnect main power supply from the feeder before working on this unit. Proceed with
caution and always wear protective equipment per NFPA 70E before working within electrical
control panel. Failure to comply can cause serious injury or death.
WARNING
Evaporator unit requires drain connections and water supply.
Do not locate these connections above any equipment that could
sustain water damage.
