Revision: 01 02/29/2016
Page 4
NOTICE
•
Improper storage can cause unit damage. Keep the unit upright and store it indoor.
Protect the unit from dampness, freezing temperatures and contact damage.
•
Risk of overhead interference. The unit may be too tall to fit through a doorway.
Measure the unit and doorway heights and follow the installation plans to verify clearances
prior to moving the unit.
•
Risk of clogged or leaking drain lines. Drain line must be inspected and maintained to
ensure that drain water runs freely through the drain system. Improper installation, application
and service practices can result in water leakage from the unit. Water leakage can cause severe
property damage and loss of critical data center equipment. Suitable leak detection system
shall be installed for the unit and water supply lines to minimize the damage.
•
Risk of leaking unit coil/or piping due to freezing and/or corrosion can cause equipment
and building damage. Use proper antifreeze and inhibitors to prevent freezing and premature
coil corrosion. If required, the water or water/glycol solution shall be analyzed every six months
to determine the pattern of inhibitor depletion.
GENERAL
The Compu-Aire Compu-Kool Ayan IV In Row Nano series is a complete environmental control
system, factory wired, tested, and specially designed to provide temperature, humidity, and
dust control for computer room installations.
The unit as shipped from the factory includes a EC fan or blower/motor package, evaporator
with expansion valves, co-axial condensers, water control valve, and humidifier, reheat
elements, electrical control package, control monitor, and other specified special options.
The Ayan iV In Row Nano series captures high temperature air from the rear of the equipment
(hot aisle) and discharges conditioned air from the front of the equipment (cold aisle). All
service access is from the front or rear of the equipment. Operator controls are located on the
front of the equipment. The equipment comes completely factory assembled, piped, and wired.
TRANSPORTATION
MODE
Visual inspection of the outer casing provides a simple indication of possible internal damage to
the equipment. Move the unit to the installation site in the upright position.
FILE A CLAIM
WITH THE SHIPPING COMPANY IF THE SHIPMENT IS DAMAGED OR INCOMPLETE. FREIGHT
DAMAGE CLAIMS ARE THE RESPONSIBILITY OF THE RECEIVER.
Optional articles such as jack stand parts, condensate pump, and remote control panel are
packed inside the unit.
