CARF-Models Sukhoi SU-31
18
Equipment installation
The top of the engine dome, right
behind the firewall is a great place to
locate the ignition boxes. We also
used this location to hide our battery
charge ports.
The provided Equipment tray is
attached to four pre-installed mounts
using 4mm screws. The
configuration may be different
depending on your equipment. Use
the photos as a guide to setup and
install the equipment tray. Note, if
you are not going to use a high
current receiver like the JR 1222
then it is recommended that you use
a Powerbox with two batteries.
There is plenty of room on the tray to
mount a Powerbox.
A plywood servo mount is provided
and used to install the throttle servo.
The location of the servo may differ
depending on your equipment. Use
the photo as a guide to aid in the
installation. We used a 3/16” carbon
tube for the throttle pushrod.
Our batteries were installed right
behind the firewall to achieve the
proper CG. Ensure the batteries and
all other equipment are securely
fastened.