Compex NetPassage 28G Hotspot, Руководство пользователя, Страница: 23 / 131

Chapter 4 Let’s Get Going – Software Setup
16
Part 1(d) : Configuring your PC with a Static IP address…
If you are using Microsoft Windows 2000 or Windows XP
1. To begin the Static IP address
configuration, follow steps 1, 2 & 3 of
Part 1(b) to get to the page on the
right.
2. Select
Use the following IP address ,
and then key in 192.168.168.X for the
IP address field, where X is any
number from 2 to 254. Following that,
enter 255.255.255.0 for the
Subnet
mask , and key in the IP address of
the router as the Default gateway .
(Note that the default IP address of the
router is 192.168.168.1)
3. Now
select Use the following DNS
server addresses , and then key in the
IP address of your DNS server in the
Preferred DNS server field. Finally,
click the OK button to complete.
!
Important: For step 5 above, you should not configure
more than one computer with the same host name
within a network. This will result in a conflict.
The DNS Server’s IP address required in step 5 should be
provided by your Internet Service Provider (ISP). If you
are unsure about it, please contact your ISP.
d
e
X
pert e
X
pert