Compex NetPassage 28G Hotspot Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 131

Compex NetPassage 28G Hotspot Скачать руководство пользователя страница 2

i

© 2006 Compex Systems Pte Ltd

All Rights Reserved
This document contains information, which is protected by copyright. Reproduction,
adaptation or translation without prior permission is prohibited, except as allowed under
the copyright laws.

Trademark Information

Compex

®

, ReadyLINK

®

and MicroHub

®

are registered trademarks of Compex, Inc.

Microsoft Windows and the Windows logo are the trademarks of Microsoft Corp. NetWare
is the registered trademark of Novell Inc. All other brand and product names are
trademarks or registered trademarks of their respective owners.

Notice: Copyrights © 2006 by Compex, Inc. All rights reserved. Reproduction, adaptation,
or translation without prior permission of Compex, Inc. is prohibited, except as allowed
under the copyright laws.

Manual Revision by Ann
Manual Number: U-0481-V1.2C

Version 1.2, January 2006

Disclaimer

Compex, Inc. provides this manual without warranty of any kind, either expressed or
implied, including but not limited to the implied warranties of merchantability and fitness
for a particular purpose. Compex, Inc. may make improvements and/or changes to the
product and/or specifications of the product described in this manual, without prior
notice. Compex, Inc will not be liable for any technical inaccuracies or typographical
errors found in this guide. Changes are periodically made to the information contained
herein and will be incorporated into later versions of the manual. The information
contained is subject to change without prior notice.

Your Feedback

We value your feedback. If you find any errors in this user’s manual, or if you have
suggestions or comments, we would like to hear from you. Please contact us at:

Fax: (65)

62809947

Email:

[email protected]

FCC NOTICE

This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This device
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to radio or television
reception, the user is encouraged to try to correct the interference by one or more of the
following measures:

«
1
2
3
4
...
»

Содержание NetPassage 28G Hotspot




































































































































Отзывы:

Нет отзывов