Compaq TruCluster Server AA-RHGWB-TE, Руководство пользователя

Страница: 287 / 320

Table 10–2: Installing the KZPSA-BB or KZPBA-CB for Radial Connection
to a DWZZH UltraSCSI Hub (cont.)
Step
Action Refer to:
2 Power down the system. Install a KZPSA-BB
PCI-to-SCSI adapter or KZPBA-CB UltraSCSI host
adapter in the PCI slot corresponding to the logical
bus to be used for the shared SCSI bus. Ensure
that the number of adapters are within limits for
the system, and that the placement is acceptable.
KZPSA PCI-to-SCSI
Storage Adapter
Installation and User’s
Guide and KZPBA-CB
PCI-to-Ultra SCSI
Differential Host Adapter
User’s Guide
3 Install a BN38C cable between the KZPBA-BB
or KZPBA-CB UltraSCSI host adapter
and a DWZZH port.
_____________________ Notes _____________________
The maximum length of a SCSI bus segment is 25 meters, including the
bus length internal to the adapter and storage devices.
One end of the BN38C cable is 68-pin high density. The other end is
68-pin VHDCI. The DWZZH accepts the 68-pin VHDCI connector.
The number of member systems in the cluster has to be one less than
the number of DWZZH ports.
4 Power up the system, and update the system
SRM console firmware and KZPSA-BB host
bus adapter firmware from the latest Alpha
Systems Firmware Update CD-ROM. Firmware release
notes for the system
(Section 4.2) and
Section 10.1.4.5
______________________ Note ______________________
The SRM console firmware includes the ISP1020/1040-based PCI
option firmware, which includes the KZPBA-CB. When you update the
SRM console firmware, you are enabling the KZPBA-CB firmware to
be updated. On a powerup reset, the SRM console loads KZPBA-CB
adapter firmware from the console system flash ROM into NVRAM for
all Qlogic ISP1020/1040-based PCI options, including the KZPBA-CB
PCI-to-Ultra SCSI adapter.
5
Use the
show config
and
show device
console
commands to display the installed devices
and information about the KZPSA-BBs or
KZPBA-CBs on the AlphaServer systems. Look
for
KZPSA
or
pk*
in the display to determine
which devices are KZPSA-BBs. Look for
QLogic
ISP1020
in the
show config
display and
isp
in the
show device
display to determine
which devices are KZPBA-CBs.
Section 10.1.3 and
Example 10–1 through
Example 10–4
Configuring Systems for External Termination or Radial Connections
to Non-UltraSCSI Devices 10–5