Compaq TruCluster Server AA-RHGWB-TE, Руководство пользователя

Страница: 134 / 320

P00>>> boot
warning -- main memory zone is not free
P00>>>
init
.
.
.
P00>>> boot
If you have initialized and booted the system, then shut down the
system and try to use the
wwidmgr
utility, you may be prevented
from doing so. If you receive the following error, initialize the
system and retry the
wwidmgr
command:
P00>>> wwidmgr -show adapter
wwidmgr available only prior to booting.
Reinit system and try again.
P00>>> init
.
.
.
P00>>> wwidmgr -show adapter
.
.
.
For more information on the
wwidmgr
utility, see the Wwidmgr
User’s Manual which is on the Alpha Systems Firmware Update
CD-ROM in the
DOC
directory.
Use the worldwide ID manager to show all KGPSA adapters:
P00>>> wwidmgr -show adapter
Link is down.
item adapter WWN Cur. Topo Next Topo
pga0.0.0.3.1 - Nvram read failed
[ 0] pga0.0.0.3.1 1000-0000-c920-eda0 FABRIC UNAVAIL
pgb0.0.0.4.0 - Nvram read failed
[ 1] pgb0.0.0.4.0 1000-0000-c920-da01 FABRIC UNAVAIL
pgc0.0.0.5.1 - Nvram read failed.
[ 2] pgc0.0.0.5.1 1000-0000-c920-cd9c FABRIC UNAVAIL
[9999] All of the above.
The
Link is down
message indicates that one of the adapters is not
available, probably due to its not being plugged into a switch. The warning
message
Nvram read failed
indicates that the KGPSA NVRAM has not
been initialized and formatted. The next topology will always be
UNAVAIL
for the host bus adapter that has an unformatted NVRAM. Both messages
are benign and can be ignored for the fabric mode of operation. To correct
the
Nvram read failed
situation, use the
wwidmgr -set adapter
command.
The previous display shows that all three KGPSA host bus adapters are set
for fabric topology as the current topology, the default. When operating in
a fabric, if the current topology is
FABRIC
, it does not matter if the next
topology is
Unavail
, or that the NVRAM is not formatted (
Nvram read
failed
).
6–24 Using Fibre Channel Storage