Compaq StorageWorks HSZ70, Руководство по установке, Страница: 44 / 168

4-6 HSZ70 Solutions Software V7.7 for Novell NetWare - PCI
Compaq Confidential – Need to Know Required
Writer: Robert Young Project: HSZ70 Solutions Software V7.7 for Novell NetWare - PCI Comments:
Part Number: AA-R8JUD-TE File Name: e-ch4 Installing the Command Console Client.doc Last Saved On: 5/16/00 10:25 AM
Choosing a Connection Method
Client offers three ways to connect to your storage subsystem: over the
controller’s serial port, the SCSI bus (Windows NT Only) or over a TCP/IP
network (does not apply to NetWare). The serial port and SCSI bus
connections are local connections and allow you to connect to only one storage
subsystem at a time.
Establishing a Serial Connection
The simplest connection to a storage subsystem is a direct, cable connection
from the Client’s host system to one of the storage subsystem's serial ports. To
establish a serial connection, connect a serial cable from one of the PC’s COM
ports to the storage subsystem's serial configuration port and proceed as
follows:
1. Select the HSZ Storage Window applet.
2. When the Connection Selection dialog box displays, click the Serial
radio button, then click OK to display the Connect Serial dialog box
(Figure 4-4).
3. On the Serial Connection dialog box, from the drop-down menu, select
the PC COM port your controller is connected to, a subsystem physical
and grid view, and a baud rate. Next click Connect to display the
Storage Window. When the Storage Window displays, you are
connected to your storage subsystem.
4. The default baud rate for the storage subsystem is 9600. Make sure you
set up your terminal emulation for 9600 the first time you use it.