Compaq StorageWorks HSZ70 Скачать руководство пользователя страница 36

Страница: 36 / 168

3-2

HSZ70 Solutions Software V7.7 for Novell NetWare - PCI

Compaq Confidential – Need to Know Required

Writer: Robert Young Project: HSZ70 Solutions Software V7.7 for Novell NetWare - PCI Comments:

Part Number: AA-R8JUD-TE File Name: d-ch3 Preparing Your Novell NetWare Host for Use with the HSZ70.doc Last Saved On: 5/17/00 9:16 AM

NOTE:

Your platform kit includes the required adapter-specific software. Use only the

adapters and drivers supplied with the platform kit since these are tested and certified to
function with the HSZ70 RAID Controller.

The NetWare SCSI Disk driver for a PCI SCSI-2 adapter is the Adaptec SCSI
disk driver AIC7870.DSK. This driver is located on the HSZ70 Solution
Software V7.3 CD-ROM for NetWare CD-ROM that is supplied with the
platform kit.

To install and load AIC7870.DSK:

If the server is running NetWare, power down the NetWare.

Insert the HSZ70 Solution Software V7.3 CD-ROM in the CD-ROM
drive on the server.

Make the directory for the drive containing the CD-ROM the current
directory.

At the MS-DOS prompt, type:

CD \NETWARE\V4_XX

Copy Adaptec 2944 drivers for NetWare into the directory containing
SERVER.EXE.

If SERVER.EXE is in the C:\SERVER.4X directory, at the MS-DOS prompt
type:

COPY *.* C:\SERVER.4X

NOTE:

See Appendix C for additional information about the STARTUP.NCF file.

To the STARTUP.NCF file, add a line similar to the following for
loading:

load aic7870.dsk lun_enable=ff multlun_targets=ff io_timeout=30 io_retries=10

The

io-timeout

and

io_retries

are only required for dual HSZ

controller support.

Содержание StorageWorks HSZ70









































































































































































Результаты поиска

Содержание StorageWorks HSZ70

Отзывы:

Compaq StorageWorks HSZ70, Руководство по установке, Страница: 36 / 168

Результаты поиска

Содержание StorageWorks HSZ70

Отзывы: