manualshive.com logo in svg

Compaq Proliant 800, Руководство пользователя, Страница: 98 / 221

Поделиться
Скачать
Compaq Proliant 800 Скачать руководство пользователя страница 98

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

4-7

Compaq ProLiant 800 Server Reference Guide

Writer:    Project:  Using the System Configuration Utility Comments:

File Name: F-ch4.doc Last Saved On: 4/24/97 9:54 AM

Setting Power-On Defaults

You can set and change the Power-On features at any time.

1. Select System Configuration from the Main Menu; then select

Power-On Defaults.

2. Set the current date in the format:

MM-DD-YYYY

3. Set the correct time in the format:

HH:MM:SS

4. Set the Power-On Num Lock state:

(  )  OFF

(*)  ON

* This activates the numeric keypad when the computer is turned ON.

System Partition

The System Partition option allows you to copy and delete configuration
files; and create, upgrade, or delete a system partition on the hard drive
for the utilities.

The following menu options are available:

Create System Partition

Upgrade System Partition

Delete System Partition

Copy Files

Delete Files

Содержание Proliant 800






























































































































































































































Отзывы:

Нет отзывов