manualshive.com logo in svg

Compaq Proliant 800, Руководство пользователя, Страница: 220 / 221

Поделиться
Скачать
Compaq Proliant 800 Скачать руководство пользователя страница 220

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

Writer:    Project:  NOTICE Comments:

File Name: A-not.doc Last Saved On: 4/22/97 4:10 PM

NOTICE

The information in this publication is subject to change without notice.

COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR
EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN, NOR FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR
USE OF THIS MATERIAL.

This publication contains information protected by copyright. No part of this publication may be
photocopied or reproduced in any form without prior written consent from Compaq Computer
Corporation.

The software described in this guide is furnished under a license agreement or non disclosure
agreement.

The software may be used or copied only in accordance with the terms of the agreement.

Product names mentioned herein may be trademarks and/or registered trademarks of their respective
companies.

 1997 Compaq Computer Corporation.

All rights reserved. Printed in the U.S.A.

Compaq, Compaq Insight Manager, SmartStart, NetFlex, and ProLiant

are registered with the United States Patent and Trademark Office.

ProSignia, QuickLock, and QVision are trademarks of

Compaq Computer Corporation.

Microsoft, MS-DOS, Windows, and Windows NT

are registered trademarks of Microsoft Corporation.

Compaq ProLiant 800 Server Reference Guide

First Edition (February 1997)

Part Number 262343-002

Содержание Proliant 800






























































































































































































































Отзывы:

Нет отзывов