Regulatory Compliance Notices
A-9
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 236843-002 File Name: g-appa Regulatory Compliance Notices.doc Last Saved On: 9/5/01 9:11 AM
Power Cords
If you were not provided with a power cord for your server, you should
purchase a power cord that is approved for use in your country.
The power cord must be rated for the product and for the voltage and current
marked on the product electrical ratings label. The voltage and current rating
of the cord should be greater than the voltage and current rating marked on the
product. In addition, the diameter of the wire must be a minimum of 1.00 mm²
or 18AWG, and the length of the cord must be between 1.8 m (6 ft) and
3.6 m (12 ft). If you have questions about the type of power cord to use,
contact your Compaq authorized service provider.
A power cord should be routed so that it is not likely to be walked on or
pinched by items placed upon it or against it. Particular attention should be
paid to the plug, electrical outlet, and the point where the cord exits from the
product.
