Hardware Upgrades
Complete the following steps to remove a drive:
1. Shut down the operating system properly, then turn off the
workstation and any external devices. Disconnect the power cord
from the grounded AC outlet.
2. Remove the workstation access panel. See “Removing the
Workstation Access Panel” in this chapter.
3. Remove the front bezel. See “Removing the Front Bezel” in this
chapter.
4. Disconnect the drive power and signal cables. If the drive is a
CD-ROM drive, disconnect the audio connector.
5. Release the drivelock.
❏
If the drive is in the minitower position, slide the drivelock to
release the drive in the drive bay.
Releasing the drives with the drivelock
Compaq Evo Workstation W6000 Hardware Reference Guide
2-20
