Hardware Upgrades
4. Refer to the following illustration to install a RIMM module.
Installing a RIMM and CRIMM
5. Reassemble the workstation.
Removing RIMMs
To remove a memory module from a RIMM socket, reverse the
procedures in the previous section.
Installing Additional Drives
This section provides a description of the drive bay components.
Instructions for removing a bezel blank and how to install or remove
a drive are also included.
Drive Bay Components
Your workstation supports up to 5 drive bays. Drive bays 1 through 3
are located on the front of the workstation. Bays 4 and 5 are located
inside the workstation. The drives support various drive
configurations.
Compaq Evo Workstation W6000 Hardware Reference Guide
2-9
