Product Features
11. Remove the subpanel
1
as described in “Removing the Bezel
Blank” in Chapter 2, and reposition the subpanel
2
with the
bezel blank in the proper orientation for the minitower
configuration.
CAUTION: Hold the subpanel straight when you pull it away from the
front bezel. Pulling the subpanel away at an angle could damage the pins
that align it within the front bezel.
Changing from a desktop to a minitower configuration
When converting from a desktop to a minitower orientation, use the
replacement subpanel that is shipped with your workstation to ensure that
the Compaq logo is properly oriented.
12. Replace the subpanel, front bezel, and the workstation access
panel. Be sure that the subpanel and front bezel align properly
with the alignment tabs.
13. Reconnect the power cord to the grounded AC outlet, then
reconnect the network cable and any external devices to the
system.
1-16
Compaq Evo Workstation W6000 Hardware Reference Guide
