Hardware Upgrades
Removing the Front Bezel
To remove the front bezel:
1. Shut down the operating system properly, then turn off the
workstation and any external devices.
2. Disconnect the power cord from the grounded AC outlet.
3. Remove the workstation access panel. See “Removing the
Workstation Access Panel” in this chapter.
4. Remove the bezel:
a. Push in on the two front bezel release latches
1
.
b. Rotate the front bezel away from the chassis
2
to release it.
Pressing the tabs to remove the front bezel
When replacing the front bezel, ensure that the bottom hinge points are
properly placed in the chassis before rotating the front bezel back into its
original position.
Compaq Evo Workstation W6000 Hardware Reference Guide
2-4
