manualshive.com logo in svg

Comnet CWGE10FX2TX8MSPOE, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CWGE10FX2TX8MSPOE Скачать руководство пользователя страница 71

INS_CWGE10FX2TX8MSPOE   02/19/21     PAGE 71

INSTALLATION AND OPERATION MANUAL 

CWGE10FX2TX8MSPOE

TECH SUPPORT: 1.888.678.9427

CLI Configuration

Node

Command

Description

enable

show vlan <1-4094>

This command displays the VLAN configurations.

enable

show vlan-list

This command displays all of the existing vlan ID.

configure

vlan <1~4094>

This command enables a VLAN and enters the VLAN node.

configure

no vlan <1~4094>

This command deletes a VLAN.

vlan

show

This command displays the current VLAN configurations.

vlan

name STRING

This command assigns a name for the specific VLAN. 
The VLAN name should be the combination of the digit or 
the alphabet or hyphens (-) or underscores (_). 
The maximum length of the name is 16 characters.

vlan

no name

This command configures the vlan name to default. 
Note: The default vlan name is “VLAN”+vlan_ID, VLAN1, 
VLAN2,…

vlan

add PORTLISTS

This command add a port or a range of ports to the vlan.

vlan

fixed PORTLISTS

This command assigns ports for permanent member of the 
vlan.

vlan

no fixed PORTLISTS

This command removes all fixed member from the vlan.

vlan

tagged PORTLISTS

This command assigns ports for tagged member of the VLAN 
group. The ports should be one/some of the permanent 
members of the vlan.

vlan

no tagged PORTLISTS

This command removes all tagged member from the vlan.

vlan

untagged PORTLISTS

This command assigns ports for untagged member of 
the VLAN group. The ports should be one/some of the 
permanent members of the vlan.

vlan

no untagged PORTLISTS

This command removes all untagged member from the vlan.

interface

acceptable frame type 
(all|tagged|untagged)

This command configures the acceptable frame type.
all      - acceptable all frame types.
tagged   - acceptable tagged frame only.
untagged – acceptable untagged frame only.

interface

pvid <1-4094>

This command configures a VLAN ID for the port default 
VLAN ID.

interface

no pvid

This command configures 1 for the port default VLAN ID.

configure

interface range 
gigabitethernet1/0/ 
PORTLISTS

This command enters the interface configure node.

if-range

pvid <1-4094>

This command configures a VLAN ID for the port default 
VLAN ID.

if-range

no pvid

This command configures 1 for the port default VLAN ID.

configure

vlan range STRINGS

This command configures a range of vlans.

configure

no vlan range STRINGS

This command removes a range of vlans.

Содержание CWGE10FX2TX8MSPOE



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды