manualshive.com logo in svg

Comnet CWGE10FX2TX8MSPOE, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CWGE10FX2TX8MSPOE Скачать руководство пользователя страница 153

INS_CWGE10FX2TX8MSPOE   02/19/21     PAGE 153

INSTALLATION AND OPERATION MANUAL 

CWGE10FX2TX8MSPOE

TECH SUPPORT: 1.888.678.9427

Web Configuration

Parameter

Description

User Name

Type a new username or modify an existing one.

User Password

Type a new password or modify an existing one. Enter up to 32 alphanumeric or 
digit characters.

User Authority

Select with which group the user associates: admin (read and write) or normal 
(read only) for this user account.

Apply

Click Apply to add/modify the user account.

Refresh

Click Refresh to begin configuring this screen afresh.

User Account List

No.

This field displays the index number of an entry.

User Name

This field displays the name of a user account.

User Authority

This field displays the associated group.

Action

Click the Delete button to remove the user account.
Note: You cannot delete the last admin accounts.

Содержание CWGE10FX2TX8MSPOE



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды