manualshive.com logo in svg

Comnet CWGE10FX2TX8MSPOE, Инструкция по установке и эксплуатации

Поделиться
Скачать
Comnet CWGE10FX2TX8MSPOE Скачать руководство пользователя страница 62

INS_CWGE10FX2TX8MSPOE   02/19/21     PAGE 62

INSTALLATION AND OPERATION MANUAL 

CWGE10FX2TX8MSPOE

TECH SUPPORT: 1.888.678.9427

Port Settings

 

Parameter

Description

Querier Mode

Select the desired setting, Auto, Fixed, or Edge. Auto means the Switch uses 
the port as an IGMP query port if the port receives IGMP query packets. Fixed 
means the Switch always treats the port(s) as IGMP query port(s). This is for when 
connecting an IGMP multicast server to the port(s). Edge means the Switch does 
not use the port as an IGMP query port. In this case, the Switch does not keep a 
record of an IGMP router being connected to this port and the Switch does not 
forward IGMP join or leave packets to this port.

Immediate Leave

Select individual ports on which to enable immediate leave.

Group Limit

Configures the maximum group for the port or a range of ports.

Apply

Click Apply to apply the settings.

Refresh

Click this to reset the fields.

Port

The port ID.

Querier Mode

The Querier mode setting for the specific port.

Immediate Leave

The Immediate Leave setting for the specific port.

Group Counts

The current joining group count and the maximum group count.

Содержание CWGE10FX2TX8MSPOE



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды