manualshive.com logo in svg

Comnet CNGE11FX3TX8MS, Инструкция по установке и эксплуатации

"Comnet CNGE11FX3TX8MS - устройство сетевого коммутатора с возможностью передачи по протоколу Ethernet и разработанный для промышленных условий. Установочное и Руководство по эксплуатации доступно для загрузки бесплатно на нашем сайте. Получите подробные инструкции по установке и использованию прямо сейчас!" Загрузите его с сайта manualshive.com.

Поделиться
Скачать
background image

INS_CNGE11FX3TX8MS[POE][HO]     Rev. 11.6.17     PAGE 74

INSTRUCTION MANUAL 

CNGE11FX3TX8MS[POE][HO]

TECH SUPPORT: 1.888.678.9427

Object

Description

ICMP Code 
Filter

Specify the ICMP code filter for this ACE. 
Any: No ICMP code filter is specified (ICMP code filter status is “don’t-care”). Specific: If you want to 
filter a specific ICMP code filter with this ACE, you can enter a specific ICMP code value. A field for 
entering an ICMP code value appears.

ICMP Code 
Value

When “Specific” is selected for the ICMP code filter, you can enter a specific ICMP code value. The 
allowed range is 0 to 255. A frame that hits this ACE matches this ICMP code value.

TCP/UDP Parameters

TCP/UDP 
Source Filter

Specify the TCP/UDP source filter for this ACE. 
Any: No TCP/UDP source filter is specified (TCP/UDP source filter status is “don’t-care”). 
Specific: If you want to filter a specific TCP/UDP source filter with this ACE, you can enter a specific 
TCP/UDP source value. A field for entering a TCP/UDP source value appears. 
Range: If you want to filter a specific TCP/UDP source range filter with this ACE, you can enter a 
specific TCP/UDP source range value. A field for entering a TCP/UDP source value appears.

TCP/UDP 
Source No.

When “Specific” is selected for the TCP/UDP source filter, you can enter a specific TCP/UDP source 
value. The allowed range is 0 to 65535. A frame that hits this ACE matches this TCP/UDP source value.

TCP/UDP 
Source Range

When “Range” is selected for the TCP/UDP source filter, you can enter a specific TCP/UDP source 
range value. The allowed range is 0 to 65535. A frame that hits this ACE matches this TCP/UDP source 
value.

TCP/UDP 
Destination 
Filter

Specify the TCP/UDP destination filter for this ACE. 
Any: No TCP/UDP destination filter is specified (TCP/UDP destination filter status is “don’t-care”). 
Specific: If you want to filter a specific TCP/UDP destination filter with this ACE, you can enter a 
specific TCP/UDP destination value. A field for entering a TCP/UDP destination value appears. 
Range: If you want to filter a specific range TCP/UDP destination filter with this ACE, you can enter a 
specific TCP/UDP destination range value. A field for entering a TCP/UDP destination value appears.

TCP/UDP 
Destination 
Number

When “Specific” is selected for the TCP/UDP destination filter, you can enter a specific TCP/UDP 
destination value. The allowed range is 0 to 65535. A frame that hits this ACE matches this TCP/UDP 
destination value.

TCP/UDP 
Destination 
Range

When “Range” is selected for the TCP/UDP destination filter, you can enter a specific TCP/UDP 
destination range value. The allowed range is 0 to 65535. A frame that hits this ACE matches this TCP/
UDP destination value.

TCP FIN

Specify the TCP “No more data from sender” (FIN) value for this ACE. 0: TCP frames where the FIN 
field is set must not be able to match this entry. 1: TCP frames where the FIN field is set must be able 
to match this entry. Any: Any value is allowed (“don’t-care”).

TCP SYN

Specify the TCP “Synchronize sequence numbers” (SYN) value for this ACE. 0: TCP frames where the 
SYN field is set must not be able to match this entry. 1: TCP frames where the SYN field is set must be 
able to match this entry. Any: Any value is allowed (“don’t-care”).

TCP RST

Specify the TCP “Reset the connection” (RST) value for this ACE.
0: TCP frames where the RST field is set must not be able to match this entry. 1: TCP frames where the 
RST field is set must be able to match this entry. Any: Any value is allowed (“don’t-care”).

TCP PSH

Specify the TCP “Push Function” (PSH) value for this ACE.  
0: TCP frames where the PSH field is set must not be able to match this entry. 1: TCP frames where 
the PSH field is set must be able to match this entry. Any: Any value is allowed (“don’t-care”).

TCP ACK

Specify the TCP “Acknowledgment field significant” (ACK) value for this ACE. 0: TCP frames where the 
ACK field is set must not be able to match this entry. 1: TCP frames where the ACK field is set must be 
able to match this entry. Any: Any value is allowed (“don’t-care”).

Содержание CNGE11FX3TX8MS



























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CNGE11FX3TX8MS

3Com Server User Manual preview
Server
Бренд: 3Com Страницы: 48
Cambium Networks PTP 550 Series Quick Start Manual preview
PTP 550 Series
Бренд: Cambium Networks Страницы: 68
Cambium Networks PTP 820S Installation Manual preview
PTP 820S
Бренд: Cambium Networks Страницы: 110
Lantronix Device Server UDS 10 Hardware Manual preview
Device Server UDS 10
Бренд: Lantronix Страницы: 8
Intellinet 523318 Instructions preview
523318
Бренд: Intellinet Страницы: 2
8level IPG-200 User Manual preview
IPG-200
Бренд: 8level Страницы: 52
Paradyne Hotwire 8343 Installation Instructions Manual preview
Hotwire 8343
Бренд: Paradyne Страницы: 6
PaloAlto Networks ION 1000 Hardware Reference Manual preview
ION 1000
Бренд: PaloAlto Networks Страницы: 28
Tripp Lite N310-30M Specification Sheet preview
N310-30M
Бренд: Tripp Lite Страницы: 2
AIC HA201-AP User Manual preview
HA201-AP
Бренд: AIC Страницы: 64
SMC Sierra Monitor FPC-N38 Startup Manual preview
FPC-N38
Бренд: SMC Sierra Monitor Страницы: 43
Juniper PTX10002-60C Quick Start Manual preview
PTX10002-60C
Бренд: Juniper Страницы: 9
Delta Electronics DVP Series PLC DVP04TC-H2 Instruction Manual preview
DVP Series PLC DVP04TC-H2
Бренд: Delta Electronics Страницы: 2
Laguna Tools Smartshop M User Manual preview
Smartshop M
Бренд: Laguna Tools Страницы: 24
3Com Router 3000 Series Manual preview
Router 3000 Series
Бренд: 3Com Страницы: 37
Crestron CNXIRP Installation Instructions preview
CNXIRP
Бренд: Crestron Страницы: 2
AVM Fritz!Box 7490 Installation And Operation Manual preview
Fritz!Box 7490
Бренд: AVM Страницы: 196
Edimax IC-7100 Quick Installation Manual preview
IC-7100
Бренд: Edimax Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды