Comnet CNGE11FX3TX8MS, Инструкция по установке и эксплуатации

Страница: 70 / 314

INS_CNGE11FX3TX8MS[POE][HO] Rev. 11.6.17 PAGE 70
INSTRUCTION MANUAL CNGE11FX3TX8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Object Description
EVC Policer ID Select which EVC policer ID to apply on this ACE. The allowed values are Disabled or the values 1
through 256.
Port Redirect Frames that hit the ACE are redirected to the port number specified here. The rate limiter will affect
these ports. The allowed range is the same as the switch port number range. Disabled indicates that
the port redirect operation is disabled and the specific port number of ‘Port Redirect’ can’t be set
when action is permitted.
Mirror Specify the mirror operation of this port. Frames matching the ACE are mirrored to the destination
mirror port. The rate limiter will not affect frames on the mirror port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is “Disabled”.
Logging Specify the logging operation of the ACE. Notice that the logging message doesn’t include the 4
bytes CRC information. The allowed values are:
Enabled: Frames matching the ACE are stored in the System Log.
Disabled: Frames matching the ACE are not logged.
Note: The logging feature only works when the packet length is less than 1518(without VLAN tags)
and the System Log memory size and logging rate is limited.
Shutdown Specify the port shut down operation of the ACE. The allowed values are: Enabled: If a frame matches
the ACE, the ingress port will be disabled. Disabled: Port shut down is disabled for the ACE.
Note: The shutdown feature only works when the packet length is less than 1518(without VLAN tags).
Counter The counter indicates the number of times the ACE was hit by a frame.
MAC Parameters
SMAC Filter (Only displayed when the frame type is Ethernet Type or ARP.)
Specify the source MAC filter for this ACE.
Any: No SMAC filter is specified. (SMAC filter status is “don’t-care”.)
Specific: If you want to filter a specific source MAC address with this ACE, choose this value. A field
for entering an SMAC value appears.
SMAC Value When “Specific” is selected for the SMAC filter, you can enter a specific source MAC address. The
legal format is “xx-xx-xx-xx-xx-xx” or “xx.xx.xx.xx.xx.xx” or “xxxxxxxxxxxx” (x is a hexadecimal digit). A
frame that hits this ACE matches this SMAC value.
DMAC Filter Specify the destination MAC filter for this ACE.
Any: No DMAC filter is specified. (DMAC filter status is “don’t-care”.)
MC: Frame must be multicast.
BC: Frame must be broadcast.
UC: Frame must be unicast.
Specific: If you want to filter a specific destination MAC address with this ACE, choose this value. A
field for entering a DMAC value appears.
DMAC Value When “Specific” is selected for the DMAC filter, you can enter a specific destination MAC address.
The legal format is “xx-xx-xx-xx-xx-xx” or “xx.xx.xx.xx.xx.xx” or “xxxxxxxxxxxx” (x is a hexadecimal
digit). A frame that hits this ACE matches this DMAC value.
VLAN Parameters
802.1Q
Tagged Specify whether frames can hit the action according to the 802.1Q tagged. The allowed values are:
Any: Any value is allowed (“don’t-care”). Enabled: Tagged frame only. Disabled: Untagged frame only.
The default value is “Any”.