Comnet CNGE11FX3TX8MS, Инструкция по установке и эксплуатации

Страница: 144 / 314

INS_CNGE11FX3TX8MS[POE][HO] Rev. 11.6.17 PAGE 144
INSTRUCTION MANUAL CNGE11FX3TX8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Group to VLAN
This page allows you to map a Group Name (already configured or to be configured in the future)
to a VLAN for the switch .
The displayed settings are:
Object Description
Delete To delete a Group Name to VLAN mapping, check this box. The entry will be deleted from the switch
during the next Save.
Group Name A valid Group Name is a string, at the most 16 characters long, which consists of a combination of
alphabets (a-z or A-Z) and integers(0-9) with no special characters allowed. You may either use a
Group that already includes one or more protocols (see Protocol to Group mappings), or create a
Group to VLAN ID mapping that will become active the moment you add one or more protocols
inside that Group. Furthermore, the Group to VLAN ID mapping is not unique, as long as the port lists
of these mappings are mutually exclusive (e.g. Group1 can be mapped to VID 1 on port#1 and to VID
2 on port#2).
VLAN ID Indicates the VLAN ID to which the Group Name will be mapped. A valid VLAN ID ranges from 1 to
4095.
Port Members A row of check boxes for each port is displayed for each Group Name to VLAN ID mapping. To
include a port in the mapping, check the box. To remove or exclude the port from the mapping, make
sure the box is unchecked. By default, no ports are members, and all boxes are unchecked.
Adding a New
MAC to VLAN
ID mapping
entry Click “Add New Entry” to add a new entry in the mapping table. An empty row is added to the table
and the Group Name, VLAN ID and port members can be configured as needed. Legal values for a
VLAN ID are 1 through 4095.
The “Delete” button can be used to undo the addition of new entry. The maximum possible Group to
VLAN mappings are limited to 256.
Auto_refresh Check this box to automatically refresh page every 3 seconds.
Refresh
Click to refresh the displayed table.
Apply Click to apply changes.
Reset Click to undo any changes made locally.