10
INTERNAL PANEL
FIGURE 2: INTERNAL PANEL
BATTERY COMPARTMENT:
F
This compartment holds 6 “AA” alkaline batteries. The ICRI will have 30+ hours of runtime at a
full duty cycle.
POWER ON-OFF SWITCH:
G
This two position switch is used to turn the ICRI “ON” and “OFF.” There is no “boot” time. If
the unit is turned off, it will immediately resume the link when turned back on.
“LOW” INPUT VOLTAGE LED:
H
This LED indicates that the operating voltage is below 8.5V. If using internal battery power,
once this LED is illuminated, there will be approximately 6 hours of remaining operation before
the batteries will need to be replaced.
“OK” INPUT VOLTAGE LED:
I
This LED indicates that the operating voltage is 8.6V or greater
.
NOTE: If neither “LOW” nor “OK” Voltage LED is lit, the ICRI will operate on voltage as low
as 6.5V. Maximum input voltage is 20VDC.
