www.commscope.com
User Guide 860547876
August 2016
Page 9 of 15
Step 2
– Use the Change button to break existing connection relationships
To break existing connection relationships for a traced port, press the
Change
button on the imVision Controller’s
display. After pressing the
Change
button, select
Yes
to continue past a warning about the connection being
broken. Afterwards, the connection relationship will be deleted for any iPatch Panel ports that were connected to
the traced port.
Step 3
– Confirm the correct connection for each port
After using the Change button, the imVision Controller will automatically step through each port that was involved
in the changed connection. For each port, a “Confirm” screen will appear to provide guidance for confirming the
connection information. Follow the on-screen instructions to create a new connection relationship between ports
or with non-iPatch equipment.
If the confirmation process is interrupted for any reason, the changed ports will remain on the Confirm list for later
processing.
Confirming a Patch Connection
on the next page shows details about viewing the Confirm list and
confirming patch connections.
