www.commscope.com
User Guide 860633028
June 2018
Page 3 of 30
© 2018 CommScope, Inc. All Rights Reserved
Overview
The SYSTIMAX
®
imVision
®
system helps customers provide and maintain physical layer connections for telecommunications
and data services. In a standard configuration, the system includes the imVision System Manager software and managed
racks or cabinets containing iPatch® Copper Panels or Fiber Shelves. Each set of one to three managed racks is managed by
an imVision Controller X.
The imVision Controller X is equipped with an intuitive touchscreen interface. Designed for optimum user-friendliness, this
interface simplifies access to the powerful capabilities of the imVision system.
Important Safety Instructions
Failing to follow basic safety precautions, including the following, may result in risk of fire, electric shock and injury to persons:
•
Follow all warnings and instructions marked on this product.
•
This product should be operated using only the power supply provided by CommScope
®
with the product.
Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading
of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment
nameplate ratings should be used when addressing this concern.
•
For proper mounting instructions, see imVision Controller X Installation Instructions 860632997 included with this
equipment.
•
Never install this product in wet locations or during lightning storms. There is a remote risk of electric shock.
•
Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the
product.
•
When installing imVision or iPatch equipment not described in this guide, follow the instructions provided with that
equipment. Take care not to compromise the stability of the rack by installation of equipment.
•
The touchscreen display is designed to be used without the need for a stylus. Never use sharp objects or tools that may
scratch or otherwise damage the touchscreen or apply excessive pressure with fingernails.
•
Never push objects of any kind into this product through slots as they may touch dangerous voltage points or short-
circuit parts that could result in a risk of fire or electrical shock.
•
Never spill liquids of any kind on the product.
•
To reduce the risk of electrical shock, do not disassemble this product. Only trained personnel should service this
product. Opening or removing covers and/or circuit boards may expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electrical shock during subsequent use.
•
If this product is installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack
environment may be greater than the room ambient temperature. Therefore, consideration should be given to installing
the equipment in an environment compatible with the product’s maximum ambient temperature (104°F or 50°C).
•
Installation of the equipment in a rack should be such that the amount of airflow required for safe operation of the
equipment is not compromised.
Note: All wiring that connects to the equipment must meet applicable local and national building codes and network wiring
standards for communication cable.
