9
7
.4
Incoming fibers should be routed first behind the splice
holder before the over-length is coiled into the tray. Route the
fibers through the cross of the tray as shown.
7
.5
In case of two or more trays, use tray wedge to keep
the upper trays in upward position during installation on lower
tray.
7
.6
After use, the tray wedge can be stored on the tower
underneath the installed trays.
7
.7
Put on butterfly tabs and tray lid to secure the fiber if
using 48 trays
7
.8
Secure the trays by the Velcro.
Содержание FOSC-350C
Страница 11: ...11 ...
