CommScope FOSC-350C, Инструкция по установке

Страница: 7 / 12

7
6 .1.5 Route the transportation tubes to the tray entrance.
Always route the tubes around the tray tower before entering the
tray.
6 .1.6 Secure the transportation tube at the splice tray
entrance with two tie-wraps.
6 .2
6 .2.1
When using Tray 48
In case of a looped cable, c oil the loops and store
them under the tray, and use tie wraps to tie up the bundle
.
6 .2.2 Remove the loose tubes up to 100mm from the cable
jacket end
.
6 .2.3
Degrease the fiber bundle and slide the
transportation tube (length of +/- 2 3 0mm) over the fibers until
the transportation tube has an overlap with the tube of 50mm.
6 .2.4 Route the transportation tubes to the tray entrance as
shown.
1
0
0 mm
50 mm
6 .2.5 Secure the transportation tube at the tray entrance
with two tie wraps. For the first tube, use the slots positioned
towards the outside. The end of the tube should be positioned on
the rib indicated with an arrow.