CommScope FOSC-350C, Инструкция по установке

Страница: 4 / 12

4
4.1 2 Mark the cable where the blocking rings will be
installed as shown. Install the rings over the cable with
the slit positioned under the cable.
4.1 3 Wrap gel strip around cable between the two blocking
rings. Press first part of the strip onto the cable to ensure the
strip sticks to the cable firmly. Make sure the strip is wrapped
smoothly without twisting between layers.
4.1 4 Continue wrapping the strip smoothly un til
the area between the two blocking rings is completely filled
with gel and add 1 extra turn of gel. In this case , the
gel will exceed the diameter of the blocking rings.
4.1 5 At the cable port where the cable will be installed, install
two black tie wraps.
4.1 6 Position the cable with the pre-installed
cable sealing block into the cable port and insert the cable
attachment bracket into the holding slot as shown.
4.1 7 Secure the cable with the two black tie wraps.
4.1 8
In unused ports , a cable plug must be installed.
Wrap the gel strip smoothly between in the two blocking rings
of the cable plug. Wrap the gel until it is flush with the blocking
rings. In this case, the gel may not exceed the height of the
blocking rings.