3
4.3
Cut the strength member on both
jacket ends
at a
distance
of
45
mm from the cable
jacket
.
4.5
Install the strength member and the aramid yarn (if
present) into the holding lug and secure the lug to the cable
attachment bracket with the bolt.
Assure that the lug lip, the
securing bolt and the hose clamp head are positioned
downwards to the bottom of the closure.
4.
6
Terminate and secure the cable attachment bracket to
the cable sheath with the cable hose clamp.
4.
7
Protect the cable hose clamp and the termination
with some layers of PVC tape.
4.
8
Clean the cable sheath with the cleaning tissue
4.
9
Select the appropriate blocking rings according to the
cable outer diameter. It is preferred that the blocking ring is
slightly larger than the cable diameter.
4.
10
Cut the selected rings on the mark.
4.1
1
Insert the cable attachment bracket into the bracket
holding slot as shown.
Note:
If a dual strength member is present, cut one of the strength
memb
e
rs flush
with the jacket end. Install the remaining strength me
m
ber in
to
the holding lug.
Verify
the proper orientation of the cable: strength member towards the attachment bracket.
4.4
If aramid yarn is present, cut the aramid yarn to a
length of 100
mm. Cut away a part of the aramid yarn and make
a braid with the remaining aramid yarn. Paste a piece of PVC
tape at
the
end of the braid.
Содержание FOSC-350C
Страница 11: ...11 ...
