23
7.3
Close the drawer by activating the spring on the right side of
the unit.
7.4
Close the cover.
8 Important steps
• Clean the fibers very well to make feeding easier.
• Always respect 30mm bendradius and prevent kinking when
repositioning tie-wraps for the transportation tubes.
• Respect overlap dimensions for transition loose tube-transportation
tube.
• Strip the loose tubes at 3,5 m.
• Provide sufficient pigtail slack for easy sliding of trays.
• For each tray select correct groove and KTU position.
• Use correct orientation and position of the KTU in the KTU bracket.
• Prevent twisting of the ribbon fiber.
• Coil the fibers at a maximum diameter, minimize the number of
coils.
• Make sure all fibers are positioned under the containment lips.
