21
6.1.3 Store the fibers into the tray. Follow the exact routing as shown.
Try to minimize the number of coils.
6.1.2 Guide the fibers in the groove plate. Make sure all fibers
are positioned under the lips. Splice the fibers and protect the splice.
Position the splice in the spliceholder.
6.1.1 Select the correct fibers from the cable side according to the
tube position labeling and the color code.
5.19 Make sure the transition of secondary to primary coating is in
the splice protector. If this is not possible: strip the secondary coating
(semi-tight) in the middle of the groove plate.
6 Sp storage
6.1
General
