3.5 Line 2 for voice calls
When you want to use
LINE 2
for voice calls only, use the following programming sequence:
1. Lift the handset connected to
EXT 20
– the system tone is heard.
2. Press
- you will hear a long tone.
3. Replace the handset for two seconds, then lift the handset. You will hear the system tone again.
4. Press
- you will hear a long tone.
5. Replace the handset for two seconds, then lift the handset. You will hear the system tone again.
6. Press
- you will hear two short system tones.
7. Hang up.
3.6 Single line for voice calls only
If you want to operate this system using only one phone line, disable the unused line as follows:
or
1. Lift the handset connected to
EXT 20
– the system tone is heard.
2. Press
- you will hear a long tone.
3. Replace the handset for two seconds, then lift the handset. You will hear the system tone again.
4. Press
or
- you will hear a long tone.
5. Replace the handset for two seconds, then lift the handset. You will hear the system tone again.
6. Press
- you will hear two short system tones.
7. Hang up.
7
ASAP P2.5X Operator’s Guide
Содержание ASAP P2.5X
Страница 1: ...Customer Service 1 800 288 6794 Customer Service E mail ccitech commandcom net ...
Страница 47: ......