70
EN
Touch "Next >" to confirm and access the next screen, allowing to define the MaxiBio board
inputs. If you installed a vehicle position sensor, you will have to check the "Car position"
option, as shown in Figure 77 below. The green LED in front of each input indicates its status
(green if the input is active).
Figure 77
The level of each input can be modified by simply touching the button representing it.
This function, along with the status indication, greatly simplifies wiring testing.
10.4.1.9.2
Maxibio outputs
In parallel mode the MaxiBio page allows you to manage up to 7 washing programs plus one
for coin vacuum; in binary mode it allows to manage up to 8 programs plus one for coin
vacuum. To set the communication mode to Parallel or Binary, check the corresponding box.
The terminal strip connection diagram will be modified accordingly. The "Activation time"
field allows to define the duration of the pulses sent to the gantry car wash, measured in
seconds.
Figure 78
