Multi PRO – Operating Manual
33
7.2
Connection to the MaxiBio boards
Before connecting the MaxiBio board to Multi PRO machine, make sure
that the main switch of the machine, which is located inside the unit on
the left wall, is turned to "0" (Figure 19) and that the machine is
completely OFF.
Multi PRO uses an electronic board to control all the devices connected to it. This electronic
board, called MaxiBio, is typically used to provide the electrical interface with the automatic
washing machines, and possibly to drive some electromechanical counters.
In binary mode, Multi PRO just requires a single board to manage all the
available washing programs. In parallel mode, the MaxiBio board allows
to manage programs 1 to 7. Alternatively, it can be used to control some
external electromechanical counters.
Figure 20
N.B.
DO NOT USE THE INTERNAL POWER SUPPLIES OF THE MACHINE TO FEED ANY DEVICES
OTHER THAN THE PRESCRIBED ONES. DO NOT POLARIZE THE INPUTS OF THE INTERFACE
BOARDS. IN ADDITION, NEVER USE THEM FOR ANY OTHER PURPOSE.
To connect the MaxiBio board, you must connect the RS485 standard cable, whose two
terminal block “appendices” are shown in Figure 21 below, to the board as shown in Errore.
L'origine riferimento non è stata trovata. below
.
